Continuing to improve Code

By - , Build 176

The Building Code is required to evolve over time to meet the needs of New Zealanders. To achieve this, the Ministry of Business, Innovation and Employment (MBIE) is holding biannual consultations and Code reviews.

Figure 1: Building Code compliance pathways triangle.

IN NEW ZEALAND, building work must meet mandatory requirements. These are laid out in the Building Act 2004 and its supporting regulations – the Building Code.

The New Zealand Building Code is performance-based as opposed to prescriptive. A performance-based Building Code provides choice and flexibility in demonstrating compliance.

Options for demonstrating compliance

There are various compliance pathways that may be used to demonstrate that building work meets the minimum performance requirements set by the Building Code.

Take a look at the Building Code compliance pathways triangle for an illustration of the Building Code system (Figure 1).

Compliance pathways that must be accepted as complying with the Building Code include:

  • Acceptable Solutions – simple step-by-step instructions that describe specific solutions for complying with the Building Code
  • Verification Methods – test or calculation methods for complying with the Building Code.
Figure 1: Building Code compliance pathways triangle.

The Building Code, Acceptable Solutions and Verification Methods documents require updating regularly to remain current with sector innovations and best practice.

Consulting on change

MBIE consults on the Building Code twice a year, every February/March and August/September. The consultation runs for 6 weeks, and stakeholders are invited to make submissions through the MBIE website on a range of issues raised for discussion.

After the consultation closes and all submissions are analysed, Acceptable Solutions and Verification Methods are updated and published in June and November each year.

The purpose of these biannual updates is to ensure effective administration of the Building Code documents. MBIE is committed to updating these documents twice a year so that the Building Code keeps pace with innovation, current construction methods and the needs of modern society. It also provides clarity, certainty and consistency to the building and construction sector.

The first biannual update changes were published in November 2018, followed by a second set in June 2019. The most recent round was published in November 2019.

Latest changes

The November 2019 changes are to:

  • support safer and more resilient foundations for buildings on liquefaction-prone ground
  • improve consenting efficiency for steel-framed housing by introducing a new steel frame Acceptable Solution.

The change to foundation requirements on liquefaction-prone ground is already in place in the Canterbury region and will now be extended to all of New Zealand. This will provide clarity to both councils and engineers, ensuring new buildings are being built safely and strongly enough to withstand liquefaction risks.

MBIE is also making the National Association of Steel Framed Housing (NASH) standard an Acceptable Solution rather than an Alternative Solution. This will help support higher-density housing by increasing the number of construction material options available in compliance pathways.

More information

You can check out the updated Acceptable Solutions and Verification Methods on the Building Performance website at www.building.govt.nz.

If you would like to receive email updates on changes to the Building Code and when consultations are open, you can subscribe to the Building Controls Update newsletter. The link to subscribe is in the ‘About us’ section at the bottom of the web page on www.building.govt.nz.

 

Quiz

1. How often are the Building Code, Acceptable Solutions and Verification Methods documents updated?
a. Once every 2 years.
b. Twice a year.
c. Every time the Building Act is updated.

2. Acceptable Solutions are:
a. Simple step-by-step instructions that describe specific solutions for complying with the Building Code.
b. Test or calculation methods for complying with the Building Code.
c. The only solution that will be accepted under the Building Code.

3. How can you make submissions on a Building Code consultation?
a. By writing a letter to the minister.
b. Through the consultation section of the MBIE website.

Answers: 1. b, 2. a, 3. b

Download the PDF

More articles about these topics

Articles are correct at the time of publication but may have since become outdated.

Figure 1: Building Code compliance pathways triangle.

Advertisement

Advertisement