What makes weatherboards weathertight?
A detailed study of water leakage through 14 walls clad with weatherboards sheds some light on the origin of leaks.
This website is best viewed on a newer browser than the one you are using. Learn about upgrading your browser (opens in a new window/tab)
Welcome to BRANZ Build. Skip to main content.
Showing results 1-7 of 7
Order by:
By Mark Bassett – 1 December 2008, Build 109, Feature article
A detailed study of water leakage through 14 walls clad with weatherboards sheds some light on the origin of leaks.
By Trevor Pringle – 1 August 2016, Build 155, Feature article
Is it a quality defect or not? It can be hard to decide, but using these established guidelines and standards will help everyone to view work from the same starting point when checking for defects.
By Trevor Pringle – 1 December 2016, Build 157, Feature article
Draughty, cold homes have been a perennial problem in New Zealand. Now, thanks to science, air barriers are a key component of the cladding systems in modern homes. Their careful design will keep air in and water out.
By Greg Burn – 1 August 2009, Build 113
Wall underlay plays an important role in the weathertightness of exterior wall assemblies in light timber-framed residential buildings, yet often it is poorly installed. Getting it right can be as simple as 1, 2, 3.
By Tony Conder – 1 August 2003, Build 77
Here’s a simple way to make your ridge junctions neat and tidy.
By Alide Elkink – 1 June 2010, Build 118
A waterproof coating is essential to maintain the weathertightness of single skin concrete block walls since concrete masonry, and particularly the mortar joints, have little resistance to water penetration.
By Colin Hill – 1 August 2012, Build 131, Feature article
With repair work to minor damage on Canterbury houses well under way, some are asking if the repairs are adequate. Sometimes, only cosmetic makeovers have been done when screw fixing of wallboard bracing is needed, writes a Christchurch architect.