Periphery roof areas
The area around the edge of a roof requires extra fixings to stop it lifting, but how much of the total roof area needs these extra fixings?
Search results
Showing results 1-10 of 28
Order by:
- Relevance
- Recent
Bracing light timber-framed roofs
By Tony Conder – 1 December 2004, Build 85
Roof bracing is one element in a continuum that provides resistance to horizontal loads. It works with the wall and foundation bracing to supply a total bracing package for a building.
Retrofitting roof insulation
By Alide Elkink – 1 April 2007, Build 99
Installing insulation retrospectively can be costly and difficult but it greatly reduces heating costs and improves home comfort. Retrofitting roof space insulation is usually the simplest, most effective option and is fully justified by the cost savings.
Storm-damaged roofs
By Alide Elkink – 1 April 2011, Build 123
The roof is usually the first thing to fail when a building is damaged in a severe storm. This risk can be minimised by making sure there are good structural connections.
Roof bracing
By Tom Edhouse – 1 February 2013, Build 134
We complete this four-part Build series on calculating bracing requirements by looking at roof bracing.
Retrofitting to resist extreme wind
By Graeme Beattie – 1 August 2008, Build 107
Strong wind causes damage to houses, particularly their roofs. A recent BRANZ study started by defining ‘extreme winds’ before developing retrofit solutions to ensure roofs on older houses are adequately secured.
Keeping skillion roofs dry
1 October 2005, Build 90
For most skillion roofs the amount of air movement in the roof cavity, although limited, is sufficient to remove small amounts of vapour. The trick is to keep those amounts of water vapour small.
Gable dormer junctions
By Alide Elkink – 1 August 2007, Build 101
Dormer roof junctions with profiled metal roofing always present a tricky area of flashing and their detailing is often conveniently overlooked by designers.
The hip ridge detail
By Tony Conder – 1 August 2003, Build 77
Here’s a simple way to make your ridge junctions neat and tidy.
Constructing timber outriggers
By Roger Shelton – 1 June 2014, Build 142
Verge overhangs are the areas of a timber-framed roof that are most vulnerable to wind damage, so it’s important to get them right.
Show results related to
Refine your search
Issues (28)
- Build 142 : 1 June 2014 (2)
- Build 141 : 1 April 2014 (1)
- Build 140 : 1 February 2014 (1)
- Build 134 : 1 February 2013 (1)
- Build 131 : 1 August 2012 (1)
- Build 130 : 1 June 2012 (1)
- Build 124 : 1 June 2011 (3)
- Build 123 : 1 April 2011 (1)
- Build 122 : 1 February 2011 (1)
- Build 114 : 1 October 2009 (1)
- Build 113 : 1 August 2009 (1)
- Build 109 : 1 December 2008 (1)
- Build 107 : 1 August 2008 (1)
- Build 106 : 1 June 2008 (1)
- Build 105 : 1 April 2008 (1)
- Build 101 : 1 August 2007 (1)
- Build 100 : 1 June 2007 (1)
- Build 99 : 1 April 2007 (1)
- Build 96 : 1 October 2006 (1)
- Build 90 : 1 October 2005 (1)
- Build 85 : 1 December 2004 (1)
- Build 81 : 1 April 2004 (1)
- Build 78 : 1 October 2003 (2)
- Build 77 : 1 August 2003 (1)
