Calculating bracing when renovating
A question frequently asked by readers is how do you compensate for the bracing that is removed when demolishing an internal wall during a renovation or refurbishment? We have some advice.
This website is best viewed on a newer browser than the one you are using. Learn about upgrading your browser (opens in a new window/tab)
Welcome to BRANZ Build. Skip to main content.
Showing results 1-10 of 14
Order by:
A question frequently asked by readers is how do you compensate for the bracing that is removed when demolishing an internal wall during a renovation or refurbishment? We have some advice.
Following on from Timber facings on aluminium joinery in the last Build, we now look at sill options for the details.
The BRANZ helpline has been asked recently about how best to detail the tricky junction between the top edge of a monopitch roof and an adjacent wall above. Here is one suggestion.
Don’t underestimate the importance of good design and orientation in determining how well a home invites in winter sun while dealing with peak summer heat. For established homes, there are also retrofitting options.
As more construction occurs on steep sites, one consequence is buildings prone to wind-induced noise. Design and mechanical solutions can reduce the effect.
Government policy encourages people to be able to stay in their own home as they get older so think proactively and consider installing a lift when building or retrofitting a 2-storey house.
NZS 3604:2011 Timber-framed buildings does not define stud length or height. This is creating some confusion, especially when continuous studs for chimneys or parapets pass intersecting framing. BRANZ has some advice.
E2/AS1 doesn’t have any details when you want to use timber head and jamb facings on aluminium window joinery. Here are a few pointers on what to think about.
Considering the key requirements of a plumbing system early in a house design can lead to a smoother consenting and building experience, fewer call-backs and happier clients.
Most new chimneys are just a chimney shape that encloses the flue, unlike traditional solid chimneys. We look at some of the construction, fixing and bracing requirements for both options.