Tolerances tables
In Build 155 Within tolerance, we outlined some of the allowable tolerances to work within for a quality result. Here, we’ve summarised that information into convenient tables.
This website is best viewed on a newer browser than the one you are using. Learn about upgrading your browser (opens in a new window/tab)
Welcome to BRANZ Build. Skip to main content.
Showing results 1-3 of 3
Order by:
By Trevor Pringle – 1 October 2016, Build 156
In Build 155 Within tolerance, we outlined some of the allowable tolerances to work within for a quality result. Here, we’ve summarised that information into convenient tables.
By Alide Elkink – 1 October 2014, Build 144
The BRANZ helpline was recently asked how the base of a drained and vented cavity should be constructed for a timber or concrete pile construction. Let’s take a look.
1 April 2012, Build 129
Braced piles use a diagonal timber brace connected to two adjacent piles to provide resistance to lateral loads. The piles are installed deeper than ordinary piles and are constructed as a pair, as shown below.