Slowing the flow
On-site stormwater management for new developments is now a requirement in many jurisdictions. This is what you need to know about options such as detention and retention tanks, soak pits and pervious paving.
This website is best viewed on a newer browser than the one you are using. Learn about upgrading your browser (opens in a new window/tab)
Welcome to BRANZ Build. Skip to main content.
Showing results 1-5 of 5
Do you want to try searching all of BRANZ?
Order by:
On-site stormwater management for new developments is now a requirement in many jurisdictions. This is what you need to know about options such as detention and retention tanks, soak pits and pervious paving.
Noisy heat pump outdoor units can rattle the neighbours, especially for those living in higher-density housing. There are, however, some straightforward steps to minimise unwelcome sounds.
When residential buildings have a wall less than 1 m (or sometimes 5 m) from the boundary, there are requirements for the boundary walls to have specific fire resistance ratings (FRR) and exterior surface finishes.
When a soak pit is required, a building consent application with calculations for pit sizing must be lodged. So, how do you make the calculations?
Controlling fire spread between residential buildings and outbuildings is important for protecting life and property. We recap the requirements and look at an area of confusion – fire rating of windows and doors in walls close to a boundary.