Bracing for monopitch roofs
Judging by the number of calls to the BRANZ Helpline, there’s some confusion around bracing requirements for monopitch roofs. Here, we sort out the issue.
This website is best viewed on a newer browser than the one you are using. Learn about upgrading your browser (opens in a new window/tab)
Welcome to BRANZ Build. Skip to main content.
Showing results 1-9 of 9
Do you want to try searching all of BRANZ?
Order by:
Judging by the number of calls to the BRANZ Helpline, there’s some confusion around bracing requirements for monopitch roofs. Here, we sort out the issue.
We complete this four-part Build series on calculating bracing requirements by looking at roof bracing.
Pitched roofs constructed with timber rafters are described in NZS 3604:2011 Timber-framed buildings as either couple-close or skillion roofs. What are the rafter fixing requirements?
A local volcanic eruption is a substantial risk to the Auckland region. Research into the impact of multiple volcanic hazards on the roofs of buildings showed that they generally deal well with volcanic ash and flying rocks landing on them.
NZS 3604:2011 Timber-framed buildings sets out how to size rafters in table 10.1. The BRANZ technical helpline has received queries on doing this, so let’s step through some examples.
Verge overhangs are the areas of a timber-framed roof that are most vulnerable to wind damage, so it’s important to get them right.
Roof failures in high winds are unfortunately too common in timber-framed buildings, but get the connections right, and the roof should stay put.
The correct fixings are needed at the various junctions of a timber-framed building structure to resist uplift in windy conditions. In this article, we summarise where to find them in NZS 3604:2011 and what is required.