Roof bracing
We complete this four-part Build series on calculating bracing requirements by looking at roof bracing.
This website is best viewed on a newer browser than the one you are using. Learn about upgrading your browser (opens in a new window/tab)
Welcome to BRANZ Build. Skip to main content.
Showing results 1-5 of 5
Do you want to try searching all of BRANZ?
Order by:
By Tom Edhouse – 1 February 2013, Build 134
We complete this four-part Build series on calculating bracing requirements by looking at roof bracing.
1 June 2011, Build 124, Feature article
By John Wierenga – 1 April 2014, Build 141
Pitched roofs constructed with timber rafters are described in NZS 3604:2011 Timber-framed buildings as either couple-close or skillion roofs. What are the rafter fixing requirements?
By Tom Edhouse – 1 June 2014, Build 142
NZS 3604:2011 Timber-framed buildings sets out how to size rafters in table 10.1. The BRANZ technical helpline has received queries on doing this, so let’s step through some examples.
By Roger Shelton – 1 June 2014, Build 142
Verge overhangs are the areas of a timber-framed roof that are most vulnerable to wind damage, so it’s important to get them right.