Sizing rafters
NZS 3604:2011 Timber-framed buildings sets out how to size rafters in table 10.1. The BRANZ technical helpline has received queries on doing this, so let’s step through some examples.
This website is best viewed on a newer browser than the one you are using. Learn about upgrading your browser (opens in a new window/tab)
Welcome to BRANZ Build. Skip to main content.
Showing results 1-3 of 3
Do you want to try searching all of BRANZ?
Order by:
By Tom Edhouse – 1 June 2014, Build 142
NZS 3604:2011 Timber-framed buildings sets out how to size rafters in table 10.1. The BRANZ technical helpline has received queries on doing this, so let’s step through some examples.
By Roger Shelton – 1 June 2014, Build 142
Verge overhangs are the areas of a timber-framed roof that are most vulnerable to wind damage, so it’s important to get them right.
By Alide Elkink – 1 August 2012, Build 131
The BRANZ Helpline regularly receives enquiries about when strapping must be used to tie the timber framing together. These tips should point you in the right direction.