Keeping skillion roofs dry
For most skillion roofs the amount of air movement in the roof cavity, although limited, is sufficient to remove small amounts of vapour. The trick is to keep those amounts of water vapour small.
This website is best viewed on a newer browser than the one you are using. Learn about upgrading your browser (opens in a new window/tab)
Welcome to BRANZ Build. Skip to main content.
Showing results 1-10 of 20
Do you want to try searching all of BRANZ?
Order by:
1 October 2005, Build 90
For most skillion roofs the amount of air movement in the roof cavity, although limited, is sufficient to remove small amounts of vapour. The trick is to keep those amounts of water vapour small.
By Tony Conder – 1 December 2004, Build 85
Roof bracing is one element in a continuum that provides resistance to horizontal loads. It works with the wall and foundation bracing to supply a total bracing package for a building.
By Alide Elkink – 1 June 2007, Build 100
Underlay is an essential part of roofing installation, but there still appears to be some uncertainty about its use and installation.
By Martin Connell – 1 August 2021, Build 185
Brick gable-ended roofs should be diagonally braced to prevent out-of-plane movement in an earthquake. It could make the difference between a home that remains liveable and one that does not.
By Roger Shelton – 1 June 2008, Build 106
The area around the edge of a roof requires extra fixings to stop it lifting, but how much of the total roof area needs these extra fixings?
By Alide Elkink – 1 June 2023, Build 196
How do you decide it is time to reroof a profiled metal roof? The answer is generally when the roof shows signs of corrosion and begins to leak.
By Trevor Pringle – 1 June 2007, Build 100
Internal or ‘within roof area’ gutters (also described as box gutters) are seen as an easy solution to the collection and disposal of roof water. However, significant inconvenience, damage and health issues may occur if one overflows.
By Alide Elkink – 1 April 2011, Build 123
The roof is usually the first thing to fail when a building is damaged in a severe storm. This risk can be minimised by making sure there are good structural connections.
By John Wierenga – 1 April 2014, Build 141
Pitched roofs constructed with timber rafters are described in NZS 3604:2011 Timber-framed buildings as either couple-close or skillion roofs. What are the rafter fixing requirements?
By Alide Elkink – 1 August 2007, Build 101
Dormer roof junctions with profiled metal roofing always present a tricky area of flashing and their detailing is often conveniently overlooked by designers.